Environmentally designed, our biodegradable BioConcrete Release (all formulas) are perhaps
the most worker- and environmentally-friendly form releases yet offered
to the concrete industry.
FEATURES & BENEFITS:
— Low odor, negligible, almost non-existent
— Designed for all concrete mixes, or easily adaptable
— Zero vegetable oils
— Extended product shelf
life
— Offers cleaner forms and tools
— Slow evaporation rate, zero water, zero evaporative solvents
— High flash point, 300ºF+; auto-ignition, 455ºF
— Minimal atmospheric mist characteristics at
proper air pressures
— Contains no waxes or silicones, eliminates plugged
spray tips
BioConcrete Release was
developed as universal barrier releases
for all concrete form operations
providing optimum
release characteristics for
— Steel
— Aluminum
— Regular & oiled plywood
— Rubber forms
— Epoxy forms
— Coated polystyrene
— Urethane forms
BioConcreteRelease is easily
— Sprayed
— Dipped
—
Swabbed
— Brushed
BioConcrete Release also serves as an
excellent protector for
— Spatter coat
— Mixer wash
— Pump truck applications
— Available in tank
wagon quantities
— Available in returnable/reusable 275-330
gallon tote tanks
— 55 gallon drums
— 5 gallon pails |
|
ENVIRONMENTAL
REPORT CARD:
— Worker and environmentally friendly
— Contains no evaporative solvents
— Biodegradable
— VOC compliant
— Non-carcinogenic
DIRECTIONS FOR USE:
Run undiluted as packaged.
GENERAL APPLICATION:
Spraying, dipping, brushing, swabbing, sponge or roller.
An even shine or glean on any type of form surface is generally all that
is required — less
is best. An 800067 spray tip @ 50-80 PSI for a fine mist should result in an even,
thin film thickness of approximately 0.0005-0.001 inch. Expected minimal coverage per gallon for all products should be: 2,000
sq.ft. for hard/smooth surfaces; 1,200 sq.ft. for pre-oiled plywood;
900 sq. ft. for untreated plywood. |
PHYSICAL DATA:
— Appearance: Clear
— Odor: Negligible
— Bulk Density: Approx. 7 lbs. per gallon
— Solubility In Water: Insoluble
SAFETY AND HANDLING:
Consult Material Safety Data Sheet for
detailed information.
FIRST AID:
Consult Material Safety Data Sheet.
STORAGE:
Store indoors or outdoors. Product performance
not affected by temperatures, however, freezing should be avoided.
DISPOSAL:
Dispose in compliance with federal, state
and local regulations. |